Modular channel layout
Straight sections, corners and junctions can be arranged around the approved floor-drainage route, subject to the available module range.
MODULAR COMMERCIAL DRAINAGE
304 Stainless Steel Modular Trench Drain System
Build straight runs, corners and junctions around the actual floor-drainage layout using prefabricated stainless-steel channel modules and removable covers.
Selection noteReference images show one GY-350 channel module at 1160 × 350 × 150 mm with two 580 × 300 × 25 mm covers. Final module sizes, outlets, falls, loading and connection details must be confirmed for each project.
Coordinate the drainage route before the floor is finished
Commercial kitchen and food-service floors may require long drain runs, changes of direction and several outlet points. A modular channel arrangement can simplify site coordination and reduce the amount of on-site fabrication. The supporting concrete, waterproofing, finished-floor falls, joint sealing and connection to the drainage network remain part of the approved project installation design.
CORE ADVANTAGES
Designed for selection, access and service
304 stainless-steel construction
The supplied reference product is described as 304 stainless steel. Final material grade, thickness and finish must be confirmed in the quotation.
Removable anti-slip covers
Perforated removable covers provide access to the channel for inspection and cleaning. Cover type and loading requirement are project-specific.
Site connection system
Prefabricated connection details are intended to reduce site welding and support faster assembly. Joint sealing and installation method must follow the approved instructions.
Configurable drain outlets
Outlet quantity, position, direction and pipe size can be coordinated against the drainage drawing and required falls.
Accessible cleaning route
Lift-out cover sections provide access along the channel, supporting routine removal of food residues and cleaning.
HOW IT WORKS
A clear process path
- 1
Review the floor plan, equipment positions and required drainage route.
- 2
Confirm channel width, depth, route, corners, junctions, outlet locations and cover loading.
- 3
Prepare the supporting base, waterproofing and floor falls according to the approved construction design.
- 4
Connect and seal the prefabricated modules and pipe outlets according to the installation instructions.
- 5
Fit the removable covers, inspect the joints and test drainage before handover.
APPLICATIONS
Where this system fits
- Commercial kitchens and food preparation areas
- Dishwashing and pot-wash zones
- Food factories and central kitchens
- Beverage and catering production areas
- Wet service corridors
- Projects requiring long or multi-directional floor drains
INFORMATION REQUIRED
Help us select correctly
- Dimensioned floor-drainage layout
- Required channel route and total length
- Straight, corner, tee and cross-junction quantities
- Channel width and depth
- Outlet quantity, position and pipe size
- Finished-floor and outlet levels
- Required cover loading
- Stainless-steel grade, thickness and finish
- Waterproofing and joint-sealing requirements
FAQ
Before you request a model
Is 1160 × 350 × 150 mm the only available size?+
No fixed full range has been confirmed. That dimension is shown only as a reference model in the supplied image. Send the floor plan and required channel route so available or customised dimensions can be reviewed.
Does the modular system require no welding at all?+
The connection system is intended to reduce on-site welding, but the final joint method depends on the selected module, waterproofing detail and installation conditions. Follow the approved project drawing and installation instructions.
Can the channel be supplied with corners and junctions?+
The reference photographs show straight sections, corners and junction arrangements. The exact combination should be scheduled from the project drainage layout before quotation.
How is the channel gradient formed?+
The required hydraulic fall may depend on the selected channel arrangement and the prepared supporting base. The project drainage designer should confirm floor levels, outlet levels and construction falls.
What information is needed for a quotation?+
Provide a dimensioned floor plan, channel route, required widths and depths, junction types, outlet locations and sizes, finished levels, cover loading and material requirements.
PROJECT REVIEW
Request Drainage Layout ReviewTurn your floor-drainage plan into a module schedule
Send the layout and levels. We will review the channel route, junction pieces, outlets and preliminary bill of materials.